Skip to main content

Sampling Query Profiler

ClickHouse runs sampling profiler that allows analyzing query execution. Using profiler you can find source code routines that used the most frequently during query execution. You can trace CPU time and wall-clock time spent including idle time.

Query profiler is automatically enabled in ClickHouse Cloud and you can run a sample query as follows

If you are running the following query in ClickHouse Cloud, make sure to change FROM system.trace_log to FROM clusterAllReplicas(default, system.trace_log) to select from all nodes of the cluster
SELECT
count(),
arrayStringConcat(arrayMap(x -> concat(demangle(addressToSymbol(x)), '\n ', addressToLine(x)), trace), '\n') AS sym
FROM system.trace_log
WHERE (query_id = 'ebca3574-ad0a-400a-9cbc-dca382f5998c') AND (event_date = today())
GROUP BY trace
ORDER BY count() DESC
LIMIT 10
SETTINGS allow_introspection_functions = 1

In self-managed deployments, to use query profiler:

  • Setup the trace_log section of the server configuration.

    This section configures the trace_log system table containing the results of the profiler functioning. It is configured by default. Remember that data in this table is valid only for a running server. After the server restart, ClickHouse does not clean up the table and all the stored virtual memory address may become invalid.

  • Setup the query_profiler_cpu_time_period_ns or query_profiler_real_time_period_ns settings. Both settings can be used simultaneously.

    These settings allow you to configure profiler timers. As these are the session settings, you can get different sampling frequency for the whole server, individual users or user profiles, for your interactive session, and for each individual query.

The default sampling frequency is one sample per second and both CPU and real timers are enabled. This frequency allows collecting enough information about ClickHouse cluster. At the same time, working with this frequency, profiler does not affect ClickHouse server’s performance. If you need to profile each individual query try to use higher sampling frequency.

To analyze the trace_log system table:

  • Install the clickhouse-common-static-dbg package. See Install from DEB Packages.

  • Allow introspection functions by the allow_introspection_functions setting.

    For security reasons, introspection functions are disabled by default.

  • Use the addressToLine, addressToLineWithInlines, addressToSymbol and demangle introspection functions to get function names and their positions in ClickHouse code. To get a profile for some query, you need to aggregate data from the trace_log table. You can aggregate data by individual functions or by the whole stack traces.

If you need to visualize trace_log info, try flamegraph and speedscope.

Example

In this example we:

  • Filtering trace_log data by a query identifier and the current date.

  • Aggregating by stack trace.

  • Using introspection functions, we will get a report of:

    • Names of symbols and corresponding source code functions.
    • Source code locations of these functions.
SELECT
count(),
arrayStringConcat(arrayMap(x -> concat(demangle(addressToSymbol(x)), '\n ', addressToLine(x)), trace), '\n') AS sym
FROM system.trace_log
WHERE (query_id = 'ebca3574-ad0a-400a-9cbc-dca382f5998c') AND (event_date = today())
GROUP BY trace
ORDER BY count() DESC
LIMIT 10